URYU, securing the number of management system UTM-1500 Series: Fastening the number of management system UTM-1500 can measure the pressure of the air motor when using pneumatic tools create a difference, and to tighten the screws after passing the root of the number carried correct count. Once the case forget tightening or insufficient tightening, can alert via a display and buzzer, it is to achieve a precise fastening tightening the number of management system controller. URYU, UTM-1500 (CN): The special connector type pressure sensor mounted on the tool (in addition to the pressure sensor CP), and the connector is connected to the back, for power supply, read the analog signal. URYU, UTM-1500 (CN) Features: 1. oil pulse wrench, pneumatic impact wrenches and other tools connection. (For the detection of back pressure, the use of pneumatic tools, in principle, to be modified into a TM type). 2. to count the number of fastening, via display and buzzer prevent you from forgetting occurs tightening or insufficient tightening conditions. 3. The controller can be set in accordance with the instructions in front of LCD, use the front button switch is simple to complete. (You can also enter setpoints via computer). URYU, UTM-1500 (CN) features: 1. The use of automatic setting function for easy set pressure value. 2. You can store 1500 fastening time and judgment result. 3. Ensure that the sound can be fastened, key confirmation tone, NOK various beep beep volume adjustment. The built-piece fastening four the number of different workpiece selection. 5. The use of the external input / output terminals (free form), the production line can interlock function. 6. By connecting a computer, and can be transmitted and received waveform data set values. Storing data, the number of total fastening reception. (Through the use of additional pressure sensors, can also be fastened receives a total number of pulses). 7. Use the blocking tool of the occasion, can be fastened time measurement and display. 8. The connector type of case, since the use of applied pressure sensor CP, you can count the number of pulses. In addition to the time control can be fastened outside, it can also be controlled number of pulses. (Due to the different conditions of the tool or the workpiece, but also not the case of measuring the number of pulses). 9. The total tightening by the number, the total number of pulses tightening (using external pressure sensor CP) were Facility. URYU, UTM-1500 (CN) Specifications: TM-type counterparts model: Various models can be transformed into the corresponding TM type. Type the name of the power use of ambient temperature, humidity Dimensions (about) mm Weight Approx (kg) UTM-1500 (PS) AC100V-240V 50 / 60Hz temperature 0-50 ℃ (not freezing) temperature at 90 ℃ RH or less (No condensation) 200 * 210 * 100 2.05 UTM-1500 (CN) AC100V-240V 50 / 60Hz temperature 0-50 ℃ (not freezing) temperature at 90 ℃ RH or less (No condensation) 200 * 210 * 100 2.03 UTM-1500 (RA- PS) AC100V-240V 50 / 60Hz temperature 0-50 ℃ (not freezing) temperature at 90 ℃ RH or less (No condensation) 280 * 220 * 420 (belt rack) 6.45 UTM-1500 (RA-CN) AC100V- 240V 50 / 60Hz temperature 0-50 ℃ (not freezing) temperature at 90 ℃ RH or less (No condensation) 280 * 220 * 420 (belt rack) 6.45